Products
Slitting machine
Specifications
|
Production rate |
5～80m/min； |
|
slitting |
Hardware cut, one for two. Four for one. Six for one. Wait |
|
Thickness (including substrate) |
Positive electrode50～200 µm（Base material：10～30μm） Negative electrode50～200 µm（Base material：4.5～20μm） |
|
Slitting width deviation |
±0.3mm |
|
Cut the coating longitudinal burrs |
≤10μm （Burrs protruding vertically from the surface of the pole plate） |
|
Slitting the coating transverse burrs |
≤12μm（Burrs protruding parallel to the edge of the incision） |
|
Electrode edge notch quality |
No quality defects such as curled edges, cracks, waves, wrinkles, stretching, exposed foil, obvious jagged edges, etc |
