Hot Products
Helium Detector for Battery Testing – Top China Suppliers & Factory Solutions for Positive Pressure Helium Detection
Specifications
| Production Capacity | ≥12ppm |
| Sealed Cavity Vacuum Detection | ≤40Pa |
| Vacuum Pump Performance | Limit vacuum ≤5Pa, pumping speed ≥250L/min, pumping time ≤8s |
| Minimum Detectable Leak Rate | 5.0×10-13 Pa·m³/s |
| Leakage Rate Display Range | 5.0×10-13 Pa·m³/s ～ 1.0×10-3 Pa·m³/s |
| Response Time | ≤1s |
| Helium Mass Spectrometer Start Time | ≤2min |
| Maximum Leak Pressure | 1500Pa |
Frequently Asked Questions
What is the production efficiency of this equipment?
The equipment maintains a high production capacity of ≥12ppm, ensuring efficient output for industrial requirements.
How accurate is the leak detection capability?
The system offers extreme precision with a minimum detectable leak rate of 5.0×10⁻¹³ Pa·m³/s and a wide display range up to 1.0×10⁻³ Pa·m³/s.
What are the vacuum pump specifications?
The vacuum pump features a limit vacuum of ≤5Pa and a pumping speed of ≥250L/min, with a rapid pumping time of ≤8 seconds.
How long does the system take to respond during testing?
The system is designed for high-speed operation with a response time of ≤1 second.
What is the startup time for the helium mass spectrometer?
The helium mass spectrometer is ready for operation within a very short startup time of ≤2 minutes.
What is the maximum leak pressure the system can handle?
The equipment is rated for a maximum leak pressure of 1500Pa.