Hot Products
China Vacuum Oven for Lithium Battery Manufacturing - Quality from Reliable Suppliers and Factory
Specifications
| Control mode | Set parameters according to the on-site production process (such as heating, vacuum, static baking, nitrogen filling, hot air circulation, cooling and cooling, etc.). After the setting is completed, start the program, and the oven will automatically run the set process |
| Air source pressure |
Compressed gas: 0.4~0.6Mpa, maximum flow value: 1L/s Vacuum source: 0.5~5Pa, minimum pumping speed: 500m³/H Dry gas: 0.5~0.2MPa, maximum flow value: 5m³/H |
| Basic heating principle | Internal and external double circulation, internal circulation before and after cross air heating control |
| Oven temperature | Normal temperature ~150℃ can be set, the instrument can adjust the compensation value |
| Heating rate |
No-load non-vacuum condition: 85℃ ≦ 45min Full load non-vacuum condition: 85℃ ≦ 90min |
| Cooling mode | The oven phase with automatic cooling function is connected to the chiller, and the chiller forces the outer layer of the oven to cool. |
| Vacuum pump port limit pressure | Vacuum pump; SV300B+JRP1000 Roots pumping speed: 1000L/min: limit pressure; ≦5pa. |
| Full load empty reach pressure value of tank | About 10pa~100pa: The specific vacuum value is related to the vacuum time, and the high vacuum must be pumped for a long time to be effective. The actual vacuum value is a gradual value, which is related to time and volume of objects. If the vacuum degree is closer to the no-load vacuum value, it means that the water removal effect is more thorough. |
Frequently Asked Questions
What is the maximum temperature range for this oven?
The oven temperature can be set from normal room temperature up to 150℃, and the instrument allows for compensation value adjustments.
How long does it take for the oven to heat up to 85℃?
Under no-load and non-vacuum conditions, it takes approximately 45 minutes or less. Under full load and non-vacuum conditions, it takes approximately 90 minutes or less.
What type of cooling system is used?
The oven features an automatic cooling function that connects to an external chiller, which forces cooling on the outer layer of the oven.
What are the vacuum pressure capabilities?
The vacuum pump can reach a limit pressure of ≦5pa. Under full load, the tank typically reaches a pressure value of about 10pa to 100pa depending on pumping time and volume.
What processes can be automated with the control mode?
The system can automatically run processes including heating, vacuuming, static baking, nitrogen filling, hot air circulation, and cooling based on your specific production parameters.
What are the requirements for the air source?
It requires compressed gas at 0.4~0.6Mpa (1L/s), a vacuum source at 0.5~5Pa (500m³/H), and dry gas at 0.5~0.2MPa (5m³/H).