China Vacuum Oven for Lithium Battery Aging - Leading Suppliers & Factory Solutions
Specifications
| Control mode |
Set parameters according to the on-site production process (such as heating, vacuum, static baking, nitrogen filling, hot air circulation, cooling and cooling, etc.). After the setting is completed, start the program, and the oven will automatically run the set process |
| Air source pressure |
Compressed gas: 0.4~0.6Mpa, maximum flow value: 1L/s Vacuum source: 0.5~5Pa, minimum pumping speed: 500m³/H Dry gas :0.5~0.2MPa, maximum flow value: 5m³/H |
| Basic heating principle |
Internal and external double circulation, internal circulation before and after cross air heating control |
| Oven temperature |
Normal temperature ~150℃ can be set, the instrument can adjust the compensation value |
| Heating rate |
No-load non-vacuum condition: 85℃≦45min Full load non-vacuum condition: 85℃≦90min |
| Cooling mode |
The oven phase with automatic cooling function is connected to the chiller, and the chiller forces the outer layer of the oven to cool. |
| Vacuum pump port limit pressure |
Vacuum pump; SV300B+JRP1000 Roots pumping speed: 1000L/min: limit pressure; ≦5pa. |
| Full load empty reach pressure value of tank |
About 10pa~100pa: The specific vacuum value is related to the vacuum time, and the high vacuum must be pumped for a long time to be effective. The actual vacuum value is a gradual value, which is related to time and volume of objects. If the vacuum degree is closer to the no-load vacuum value, it means that the water removal effect is more thorough. |
Frequently Asked Questions
QHow does the control mode of this oven function?
The oven operates automatically after parameters are set according to your specific production process. Supported processes include heating, vacuum, static baking, nitrogen filling, hot air circulation, and cooling.
QWhat are the required air source pressures for operation?
The system requires a compressed gas pressure of 0.4~0.6Mpa (max flow 1L/s), a vacuum source of 0.5~5Pa (min pumping speed 500m³/H), and dry gas pressure of 0.5~0.2MPa (max flow 5m³/H).
QWhat heating principle does the oven use and what is its temperature range?
The oven utilizes an internal and external double circulation system, featuring internal circulation before and after cross air heating control. The temperature can be set from normal room temperature up to 150℃, with adjustable instrument compensation.
QHow fast can the oven reach the target temperature of 85℃?
Under no-load, non-vacuum conditions, the oven reaches 85℃ in 45 minutes or less. Under full-load, non-vacuum conditions, it reaches 85℃ in 90 minutes or less.
QHow does the cooling system work?
The oven has an automatic cooling phase connected directly to an external chiller. The chiller forces cooling fluid through the outer layer of the oven to lower the temperature efficiently.
QWhat is the significance of the vacuum pressure values?
The vacuum pump limit pressure is ≤5pa (using SV300B+JRP1000 Roots pump). Under full load, the tank reaches about 10pa~100pa. A vacuum level closer to the no-load value indicates a more thorough and effective moisture removal process.