Hot Products
China Slitting Machine Suppliers - High-Quality Factory Equipment for Precision Cutting and Tension Control
Specifications
| Production rate | 5～80m/min |
| Slitting | Hardware cut, one for two. Four for one. Six for one. Wait |
| Thickness (including substrate) |
Positive electrode: 50～200 µm (Base material: 10～30μm) Negative electrode: 50～200 µm (Base material: 4.5～20μm) |
| Slitting width deviation | ±0.3mm |
| Cut the coating longitudinal burrs | ≤10μm (Burrs protruding vertically from the surface of the pole plate) |
| Slitting the coating transverse burrs | ≤12μm (Burrs protruding parallel to the edge of the incision) |
| Electrode edge notch quality | No quality defects such as curled edges, cracks, waves, wrinkles, stretching, exposed foil, obvious jagged edges, etc |
Frequently Asked Questions
What is the production rate of the slitting system?
The system operates at a highly efficient production rate ranging from 5 to 80 meters per minute, allowing for flexible output adjustments based on processing needs.
What slitting configurations are supported?
The equipment utilizes high-precision hardware cutting. It supports versatile configurations, including one for two, four for one, six for one, and other custom setups.
What electrode thickness can this machine process?
It supports positive electrodes with a total thickness of 50～200 µm (base material: 10～30 µm) and negative electrodes with a total thickness of 50～200 µm (base material: 4.5～20 µm).
How precise is the slitting width?
The machine delivers high-precision cutting with a slitting width deviation of only ±0.3mm.
What are the quality standards for longitudinal and transverse burrs?
The cut coating longitudinal burrs (protruding vertically from the pole plate surface) are kept under ≤10μm, and the transverse burrs (protruding parallel to the incision edge) are kept under ≤12μm.
How does the machine guarantee electrode edge notch quality?
The slitting process ensures high-quality results with zero defects, preventing curled edges, cracks, waves, wrinkles, stretching, exposed foil, or obvious jagged edges.