Hot Products
China Slitting Machine Factory: High-Quality Suppliers for Precision Pole Sheet Cutting Solutions
Specifications
| Production rate | 5～80m/min |
| Slitting | Hardware cut, one for two. Four for one. Six for one. Wait |
| Thickness (including substrate) |
Positive electrode: 50～200 µm (Base material: 10～30μm) Negative electrode: 50～200 µm (Base material: 4.5～20μm) |
| Slitting width deviation | ±0.3mm |
| Cut the coating longitudinal burrs | ≤10μm (Burrs protruding vertically from the surface of the pole plate) |
| Slitting the coating transverse burrs | ≤12μm (Burrs protruding parallel to the edge of the incision) |
| Electrode edge notch quality | No quality defects such as curled edges, cracks, waves, wrinkles, stretching, exposed foil, obvious jagged edges, etc. |
Frequently Asked Questions
What is the production rate of this slitting system?
The system operates at a production speed of 5 to 80 meters per minute (5～80m/min), allowing for efficient processing.
What slitting configurations are supported?
It supports hardware cutting methods with multiple options, including one-for-two, four-for-one, and six-for-one configurations.
What electrode thickness ranges can this equipment process?
It processes positive electrodes of 50～200 µm (substrate: 10～30μm) and negative electrodes of 50～200 µm (substrate: 4.5～20μm).
What is the precision level for the slitting width?
The machine delivers highly accurate results with a slitting width deviation of only ±0.3mm.
How are the edge burrs controlled during the slitting process?
Longitudinal burrs are restricted to ≤10μm (vertical protrusions), and transverse burrs are kept within ≤12μm (parallel to the incision).
Does the process prevent damage to the electrode edges?
Yes, the slitting quality ensures no defects such as curled edges, cracks, waves, wrinkles, stretching, exposed foil, or obvious jagged edges.