Hot Products
China Slitting Machine Factory - High-Quality Suppliers for Precision Cutting Solutions
Specifications
| Production rate | 5～80m/min |
| Slitting method | Hardware cut, one for two, four for one, six for one, etc. |
| Thickness (including substrate) |
Positive electrode: 50～200 µm (Base material: 10～30μm) Negative electrode: 50～200 µm (Base material: 4.5～20μm) |
| Slitting width deviation | ±0.3mm |
| Cut the coating longitudinal burrs | ≤10μm (Burrs protruding vertically from the surface of the pole plate) |
| Slitting the coating transverse burrs | ≤12μm (Burrs protruding parallel to the edge of the incision) |
| Electrode edge notch quality | No quality defects such as curled edges, cracks, waves, wrinkles, stretching, exposed foil, obvious jagged edges, etc. |
Frequently Asked Questions
Q What is the production rate of this slitting equipment?
The production rate ranges from 5 to 80 meters per minute, allowing for highly efficient output depending on production requirements.
Q What slitting configurations does the system support?
It features hardware cutting and supports various configurations, including one for two, four for one, and six for one setups.
Q What are the thickness specifications for positive and negative electrodes?
The positive electrode thickness ranges from 50 to 200 µm (base material: 10–30 µm), and the negative electrode thickness ranges from 50 to 200 µm (base material: 4.5–20 µm).
Q What is the maximum slitting width deviation?
The slitting width deviation is kept to a strict minimum of ±0.3mm to ensure high precision.
Q How are longitudinal and transverse burrs controlled?
The longitudinal coating burrs are controlled to ≤10μm, while the transverse coating burrs are kept within ≤12μm.
Q What quality defects are avoided at the electrode edge?
The cutting quality ensures there are no defects such as curled edges, cracks, waves, wrinkles, stretching, exposed foil, or obvious jagged edges.