Hot Products
China Automatic Pole Die Cutting Machine - Efficient Suppliers and Factory Solutions for High Production
Specifications
Die cutting speed |
20-80- strokes/min (depending on the length of the charge) |
Die type |
Laser rubber die (low cost and fast change) |
Incoming width |
≤350mm (including pole ear) |
Incoming thickness |
0.08～0.3mm |
Effective die cutting area |
320*150mm |
Incoming coiling uniformity coating width error |
≤±0.5 mm |
Coating method and breakage requirements |
Continuous coating, unilateral out of the pole ear, and the pole ear damage is less than 0.5mm |
Receiving mode |
The manipulator automatically picks up the film |
Frequently Asked Questions
What is the die cutting speed of this equipment?
The die cutting speed ranges from 20 to 80 strokes per minute, which primarily depends on the specific length of the charge.
What type of die is used in this machine?
This machine uses a laser rubber die, which offers the advantages of being highly cost-effective and easy to replace quickly.
What are the width and thickness limits for incoming materials?
The incoming material width should be ≤350mm (including the pole ear), and the incoming thickness must range between 0.08mm and 0.3mm.
What is the effective die cutting area of the system?
The system features an effective die cutting area of 320*150mm.
How does the automatic receiving mode work?
The machine is equipped with an automated manipulator that automatically picks up and collects the finished film.