ABOUT US

Rubber roller is a roller shaped product made of metal or other materials as the core and rubber coated by vulcanization. As a major variety of rubber industrial products, rubber rollers play an extremely important role. Widely used in metallurgy, paper making, fiber textile, printing and dyeing, wood processing, plastic processing, office equipment and other industries, the roller has a close relationship with industrial continuity and efficiency. A rubber roll is generally composed of an outer layer of rubber, a hard rubber layer, a metal core, a roll neck and a vent hole.

The company can choose different substrates and outsourcing different adhesives according to different needs, such as: neoprene rubber, butadiene rubber, polyurethane rubber, silicone rubber, chlorosulfonated polyethylene, ethylene propylene rubber, and can carry out anti-static treatment.

The introduction of the original mirror polishing machine in the United States, using the polishing sand belt of 3M company in the United States, the finish can reach Ru0.001(domestic finish grade 14).

According to customer drawings or requirements, 45# seamless steel pipe or alloy steel pipe material processing, the middle installation channel can be jacketed, cooling or heating temperature difference is not more than ±1℃.

The hardness of the roller body after heat treatment can reach HRC55-58°, the hardness of chromium plating is above HR65°, the thickness is 0.06mm-0.20mm(according to customer requirements), and the thermal deformation is less than 0.01mm. High wear resistance, low friction coefficient, long service life.

After chromium plating on the surface, the acid and alkali corrosion resistance is greatly enhanced, because the chromium layer of the chromium plating roller is very stable in different environments and is not easy to react chemically, so it will not be corroded by some acid and alkali liquids and gases.

Once the chrome coating on the surface of the electroplating chromium roller is damaged, it can be re-plated to reduce the cost of use and can be reused.

Mainly used in various film production lines, paper production lines, large printing equipment, film equipment, widely used in flexographic printing machine, water-based ink printing machine, composite machine, coating machine, papermaking, metallurgy, chemical industry, weaving, transportation.

This waste tank is a storage and extrusion machine developed by our company specifically for the collection and compression of lithium battery positive and negative electrode materials in the slitting process or die cutting process. It has the characteristics of simple operation, convenient discharge of waste material, small footprint, stable operation, low noise and so on. This product is a powered waste collection device, which compresses waste through extrusion.

This product is mainly composed of servo compactor, air intake, air exhaust, electric control box, continuous bagging discharge plate and waste transfer box. The fan in the main engine is used to provide power for the scrap, and the solid gas separation of the waste in the transfer box is realized by the principle of aerodynamics through the processing of the pre-packed waste. The waste gas enters the negative pressure dust removal equipment through the exhaust pipe for secondary filtration, and the waste enters the waste extrusion unit for compression.

With the continuous filtration conditions, the accumulation of dust on the outer surface of the filter barrel will be more and more, which will increase the operating resistance of the equipment, when it reaches a certain degree, the dust collector begins to clean. The cleaning method of this product is online cleaning. When the pulse valve is opened, the compressed air in the cylinder ejects a high speed and high pressure jet through the pulse valve, which makes the instant positive pressure in the filter barrel and produces swelling and micro-movement; And the formation of a wave from the mouth of the cylinder is quickly transmitted to the bottom of the cylinder, so as to shed the dust deposited on the filter material and achieve ash cleaning. According to the control system setting, the dust collector enters the cleaning of the next group of filter drums, and the cycle continues.

Filter system adopts imported anti-static cartridge filter to avoid electrostatic spark; Vertical installation structure, avoid the accumulation of dust, surface PTFE coating treatment, high filtration accuracy, the equivalent diameter of 0.3µm above the dust filtration efficiency of more than 99%. The filtration efficiency of the filter is 0.3-0.5μm dust, and the filtration accuracy reaches 99.97%.

The use of advanced processing equipment, the selection of the best imported materials, the unique production process, can be customized according to the customer's sample or drawings of various styles, different purposes of the product.

Brush roller, mainly used in food processing industry, glass ceramics industry, metal processing industry, polishing cleaning industry, textile machinery, lithium production equipment and so on. Nylon silk brush roller: high elasticity, high wear resistance, high temperature resistance of 1010 nylon silk brush in the food industry is very popular, because its material is non-toxic and pollution-free food grade. Its high wear resistance, high temperature resistance in the textile, printing and dyeing industry is also popular. Its high elasticity is widely sold in glass cleaning and other cleaning industries.

Abrasive silk brush roller: abrasive silk is added with special materials such as gold and steel sand, which is better than nylon silk in wear resistance. Because of its acid resistance, alkali resistance and other characteristics; It is used to clean the steel plate to remove rust and oxidation, the primary processing of steel, the color coating of steel plate, and the deburring and polishing of other casting parts.

1, high strength, good wear resistance.

2, high temperature resistance, oxidation resistance, corrosion resistance, suitable for all kinds of harsh environment.

3, no static electricity, wear collision is not easy to produce sparks, suitable for different environments.

4, stable performance, can effectively prevent belt conveyor deviation, fork pulling, heating, fire, skid and other phenomena.

5, corrosion resistance, no corrosion of acid, alkali and salt.

6, fully sealed, both ends are equipped with polysulfide rubber sealing ring, lubricating fat does not leak, rolling shaft can be run in a fully sealed state for a long time.

7, long life, 2-3 times longer than the steel roller, can reduce wear, extend service life.

8, the ceramic surface forms an oxide film, which is not attached to any substance, and any substance does not react.

9, high economic efficiency, can reduce the comprehensive cost of belt conveyor, reduce maintenance hours.

10. Light weight, 1.2-8kg lighter than steel rollers.

The use of advanced processing technology, the selection of the best imported materials, the introduction of imported precision equipment, unique production process, can be processed according to customers' samples or drawings of various shapes, various patterns of roller surface, suitable for all kinds of equipment

Accuracy: coaxiality, flatness, runout: ≤0.02mm.

The company's polar ear reinforcing wheel (polar ear pressure wheel) is the designated manufacturer of Weilai Automobile, Tianhong Laser, Chaoye Precision, Guangdong Yixin Feng and other well-known enterprises.

The purpose of the inflatable shaft is very wide, where there are winding, winding, slitting machines, can be applied, even including the light metal industry. Such as: inflatable shaft is mainly suitable for printing equipment: plate printing machine, flexo printing machine, concave plate machine, trademark printing machine and so on. Other machinery: coating machine, leather machine, molding machine, embossing machine, slitting machine, die cutting machine, rewinding machine, paper tube machine, bag making machine, laminating machine, film machine, film blowing machine, foam machine, film machine, embossing machine, paper machine, no cloth machine, cloth inspection machine, hot stamping machine, battery equipment and other related machinery supporting the use of;

The slip shaft is used in the scuttering machine to receive the reel, and is also used in special occasions to put the reel, the purpose is to use the principle of slip rings on the slip shaft to slip, so that multiple rolls on the shaft are always maintained constant tension. When working, the slip ring is controlled with a certain value of sliding torque (torque slipping, sliding amount just compensates for the generated speed difference, so as to accurately control the tension of each roll of material, so as to ensure the constant tension winding and the quality of winding.

It is made of stainless steel tube and high B-value rare earth alloy NdFeb, and is made by special production method. It can be combined on a fixed frame to form a magnetic filter. When the iron-containing material passes through, it is attracted by the magnetic rod, and the iron-containing material is firmly adsorbed on the tube wall of the magnetic rod to ensure the integrity of the equipment and the safety of the product.

Product features: Can be installed in the production line can contact with the material at any location, space saving, easy installation, magnetic rod using rare earth alloy NdFeb as a magnetic source, strong magnetic force, simple structure, long service life, specifications can be customized according to customer requirements and production site conditions, magnetic force up to 8000-15000GS.

Mainly used for: removing ferromagnetic impurities in powder, particle and liquid or slurry, widely used in ceramics, electric power, mining, plastics, chemical, rubber, pharmaceutical, food, environmental protection, pigments, dyes, electronics, metallurgy, lithium and other industries.

Carbon fiber roller is becoming more and more important in industrial production, printing, paper, textile, new energy and other traditional industries have many manufacturers to replace the steel roller with carbon fiber roller. Carbon fiber roller light weight, high strength, strong durability, so favored by industrial enterprises;

Mainly used in lithium battery production equipment, paper making machinery, printing equipment, textile machinery, film machinery and so on;